Principles of Bed Making in Hospital

4.5/5 - (11 votes)

Bed making is a practice that is performed mainly in healthcare facilities to reduce the risk of infection. This involves preparing and arranging various kinds of beds. It is a process that involves preparing a tidy bed for the patient at the medical facilit so lets the this article which title called Principles of Bed Making in Nursing, Types of bed making and procedure of bed making full details.

Table of Contents

Bed making is the scientifically based practice that hospitals use to avoid spreading infection by systematically making the patient’s bed. It is a duty conducted in households and other facilities, such as hospitals, hotels, and educational or military houses. The act of making beds is a standard step in nursing. Below we will discuss the Principles of Bed Making in detail on http://www.examlabs.com.

Principles of Bed Making in Nursing

Guiding principles of Bed Making

There are microorganisms everywhere, including on the skin, in the surroundings, and on the patient’s items.
The nurse takes precautions to stop the spread of microbes via direct or indirect contact with a new host or to stop their proliferation.
A secure and comfy bed will promote relaxation and sleep and shield patients from several problems, such as foot drops, bedsores, etc.
A healthy body mechanic keeps the body aligned and reduces tiredness.
Systematic methods of operation save time, energy, and resources.

Basic principles of Bed Making

Before beginning, all prerequisites should be gathered.
When making beds and after that, wash your hands.
Lift the mattress while loosening the bed linen to remove the sheets from the bed. Never use force while pulling the sheets.
Bed linens should always be folded from top to bottom.
When the bed is empty, rotate the mattress three times or from top to bottom.
Before making the bed, always arrange the sheets in the proper sequence, with the closed side facing away from you and touching the floor.
Never let your uniform contact the bed, and keep dirty linen off it.
If further assistance is not available, utilise side rails to prevent falling while making a bed for helpless patients to avoid their doing so.
A sheet or blanket must never hide the patient’s face.
Shaking the soiled linen in the air might spread the microorganisms, excretions, and fluids they contained.
Instead of leaving soiled linen on the floor, it should be stored in a dirty linen box.
Any talk while changing the bed must include the patient and cannot be about the nurses’ personal lives.

Topics To Read:

Types of Bed Making in Nursing – Principles of Bed Making

1). Closed Bed

The “closed bed” is a bed that has been stripped of its linens but still has the top sheet on it. This is done so that the sheets under the top sheet are entirely shielded from any dust or debris present while the staff waits for a patient to be admitted. The covered bed is turned over for use when the patient is brought in.

2). Open Bed

When a hospital bed is available for a patient but not yet in use by that patient, the bed is referred to as an open bed. Depending on the circumstance, it is built for either a new client or an ambulatory customer.

3). Bed for Admission

The bed used for entry is set up as an open bed. After taking a shower and, if appropriate for the facility, donning an appropriate hospital gown, the patient finally makes their way to the bed.

Bed Already Taken

This is to make a bed while the customer is there. This is crafted for a customer who cannot get out of bed alone. The client will get the same level of preparation and aftercare as they would in an open bed set.

4). Cardiac Bed

A cardiac bed is used to assist a patient in assuming a sitting posture that will provide him with the highest possible level of comfort while requiring the least effort on his part. Dyspnea is a common symptom of cardiac illness, and the primary objective of the cardiac bed is to alleviate this symptom.

5). Fracture Bed

It utilises a client with a trunk or extremities fracture to offer solid support by using a firm mattress that sits on a fracture board or bed board. This is done so that the client can have a more comfortable recovery.

6). Blanket Bed

A patient suffering from renal illness requested the blanket bed so that they might increase their body’s ability to eliminate waste via the skin.

Objectives for Bed Making

To give the patient a clean and pleasant environment.
To save the exhausted sufferer the effort of making the bed.
To rid the skin of any potential irritants.
To get appropriately rid of dirty linens.
To provide a unit or ward with a clean and organised look.

Things While Making Your Bed in the Hospital

https://youtu.be/VPGLhcM7r94

While you are preparing the patient’s bed, you must keep in mind certain information that is beneficial not only to us but also to the patient so lets read how to bed making in easy ways.

Keeping the bed in an elevated posture during the making of the bed helps to maintain appropriate body alignments for the nursing personnel.
The nurse has to pay attention to how she moves when the process is being performed so that she doesn’t waste any time or effort.
After completing this task, the bed should be lowered to a lower position.
While making up an occupied bed, make sure the patient is safe and comfortable.
Hands should be washed both before and after making the bed, and gloves should be used when making the bed.
Maintain your discretion when you make the bed.
Separate dirty linen from clean uniforms to prevent the spread of germs.
To avoid spreading germs across the room, you should avoid shaking dirty linen.
When making the bed, you should avoid mixing dirty and clean linen.
When caring for a bedridden patient, the patient’s mattress has to be regularly aired out and checked for lumps and folds.

Conclusion

We went through the Principles of Bed Making in nursing. Determine whether or not the client is comfortable and safe. Check that all the drainage tubes and connections connected to the patient are working correctly. After the operation is complete, bring the whole piece into the utility room, and after it has been cleaned and disinfected, reinstall all of the articles.

Topics To Read: